Wi-Fi Connection: “Weak Security” Message on iOS Devices

If the message Weak Security or Privacy Warning is displayed in the Wi-Fi settings of your Apple iPhone or iPad, this is usually due to stricter security checks introduced by the Apple operating system starting with iOS 14 and iOS 15.

 

This message does not mean that your connection is immediately at risk. By default, our routers use the encryption method WPA2-PSK [AES]. This still provides a very high level of basic security and ensures that older devices in your household can continue to connect without problems.

However, Apple no longer considers this standard sufficient without additional WPA3 protection and therefore displays a warning message.

You can resolve this message yourself by adjusting the encryption mode in your router’s user interface.

Comparison of encryption modes

CriterionWPA2-PSK [AES]WPA2-PSK [AES] + WPA3-Personal
SecurityVery goodEven better
CompatibilityMaximum compatibilityVery good, although some older devices may encounter issues
Warning on iPhoneMay be displayedUsually not displayed
Future-proofingProven standardCurrent standard
IoT and smart home devicesUsually no issuesIsolated issues possible

Adjust security settings

To remove the warning message from your iOS devices, proceed as follows:

  1. Open an Internet browser on a device connected to your network and access your router’s configuration page. This is usually done via the address tplinkmodem.net or via your gateway’s IP address.
  2. In the main menu, navigate to the advanced Wi-Fi settings. These are usually located under Advanced, then Wi-Fi, and finally Wi-Fi Settings.
  3. Locate the Security selection field and open the corresponding drop-down menu.
  4. Change the mode from WPA2-PSK [AES] to WPA2-PSK [AES] + WPA3-Personal.
  5. Then click Save. The router’s Wi-Fi module will briefly restart to apply the changes.

Effects of the change

With the combined mode, modern devices such as newer iPhones or iPads automatically use the more advanced WPA3 encryption. As a result, the warning message disappears from the operating system.

At the same time, older devices in the household that do not yet support the new standard automatically fall back to WPA2 and retain unrestricted Internet access.

In rare cases, very old smart home components, older Wi-Fi cameras or older printers may not process the combined mode correctly and could lose their connection.

If such an issue occurs, you can return the setting in the router menu to WPA2-PSK [AES] at any time to restore full compatibility within your household.